We have ordered a food safe version of the vibrator ring case from a 3d printing service provider. The case consist of the main body and a kind of cap to close the case.
The design could be improved to have more space for the battery and a more stable cap. The ring diameter is too small for most males, but you can combine the vibrator ring and the “organic” vibrator for her. The combination of these two vibrators gives you a vibration in two dimensions. (The vibration of a vibration motor is only strong in one direction – you can think of either the x-, y- or z-axis of a coordination system. If you combine two motors you have vibration along two axes of the coordination system, take three you have vibration along all axes).
The video shows how-to assemble your own vibrator ring.
View with YouTube
Improved version! Open with Tinkercad. Download from Thingiverse.
Chain of Ball Vibrator design with cap
The new design catches the “chain of balls” design theme used in some sex toys. It was constructed in Tinkercad and it is really simple to do it on your own. This how-to video explains the construction in detail.
The design is composed from several spheres
Try it on your own in Tinkercad. Just grab a sphere, make a copy, resize the copy, make a copy again and repeat this until you have a chain of spheres. Now select all sphere and use the “align” tool. That’s it.
The tricky part is the screw cap. This is needed to enclose the body interaction vibrator development board.
Chain of Ball vibrator being printed in ABS, XYZ printer 1.0, on the bottom is the support material
As alternative to the 3d printed form a flexible form made with silicone could improve the handling of the body interaction board (BI1) for certain applications. The vibration is more comfortable and less noisy compared to other cases. If you want to do it on your own follow this how-to.
Silicone molded BI1: vibration motor (top), RF12b (bottom)
silicone molded BI1 board – vibration motor (top), LiPo (bottom)
Some adult toys are made of silicone or at least are coated with silicone. Silicone cases are easy to clean.
We have constructed a 3D printed form where we will fill in the silicone. The form comes in two parts that have to be fixed to one another by tinkering wire. In addition the board has to be hooked to the form. For this we use a USB connector which is plugged in the USB port of the board. Then the USB connector is fastened to the form.
Form for molding
USB connector holding BI1 board is fastened with tinkering wire
Use a silicone which will become solid after moulding. This property of silicone is indicated by the shore A value. Silcone with a low value is flexible. We use silicone with shore A 43.
Molding form with USB connector and 2 component silicone shore a 43
molded BI1 and 3d printed form
Do you want to try it on your own? Follow this how-to and tell us your experience.